Three calibration options are available:
- Basic broadband calibration “Y”: from UV to the NIR range (248 nm to 2.5 µm).
- Additional calibration “C”: for CO2 lasers (10.6 µm).
- Additional calibration “E”: for single-shot energy measurements with ± 5% accuracy.
The calibrations of the PRONTO-250-FLEX are metrologically traceable to NIST at 1064 nm and optionally at 10.6 µm. The same applies to the wavelength correction. It is therefore ensured that all measurement results comply with the international standards defined by the National Institute of Standards and Technology.
One of the key reasons for the success of the PRONTO 250 series is its intuitive touchscreen interface and wide measuring range (0.5 W – 250 W). If desired, the measurement data can be saved on the device and transferred to a computer over a USB interface for evaluation and storage.
Laser Components Germany GmbH
Werner-von-Siemens-Str. 15
82140 Olching
Telefon: +49 (8142) 2864-0
Telefax: +49 (8142) 2864-11
http://www.lasercomponents.com/de
Chief Marketing Officer
Telefon: +49 (8142) 2864-0
E-Mail: presse@lasercomponents.com
