Key applications for the KTS1890 include gaming and workstation notebooks, desktop PCs, docking stations, monitors, conferencing systems, gaming consoles, and any USB Type-C Dual Role Port design with PD 3.1 EPR 28V input.
The KTS1890 is a USB VBUS safety management load switch for 15W current-source output in systems with 28V EPR current sink input. The input operating range is 2.5V to 5.5V, but the output withstands up to 35VDC at the USB port. Current limit protection (CLP) is adjustable from 400mA to 4.0A. Low on-resistance minimizes heat and voltage droop. Soft-start (SS) limits inrush current. Reverse-current protection (RCP) acts as a 20mV “ideal diode” with fast recovery.
Karl Volk, System Applications Director at Kinetic Technologies, says, “The combination of our new KTS1890, together with our KTS1898 and KTU1128 parts, provides a chipset trio setting a new benchmark for protection at every 28V USB EPR port, ensuring the quality and operational integrity of your products.”
Additional integrated safety management for the KTS1890 device includes ultra-fast over-current protection (OCP), short-circuit protection (SCP) during and after soft-start, over-temperature protection (OTP), and integrated transient voltage suppression (TVS) for IEC industry standard ±30kV ESD and ±130V surge protection.
KTS1890 Product Features
- 5V to 5.5V Operating Voltage Range at IN
- 35VDC Abs. Max. Rating at OUT
- Adjustable Current Limit Protection (CLP)
- 400mA to 4.0A via RISET
- 27mΩ typ. On-Resistance from IN to OUT
- Soft-Start (SS) Limits Inrush Current
- “Ideal Diode” Reverse Current Protection (RCP)
- 20mV Forward Voltage and 15μs Fast Recovery
- 8A, 150ns Over-Current Protection (OCP)
- Short-Circuit Protection (SCP) during and after SS
- Over-Temperature Protection (OTP)
- Transient Voltage Suppression (TVS) at OUT
- ±130V Surge Protection (IEC61000-4-5)
- ±30kV ESD Contact Discharge (IEC61000-4-2)
- ±30kV ESD Air Gap Discharge (IEC61000-4-2)
- EN Enable Logic Input
- FON Fast ON Logic Input for Fast Role Swap (FRS)
- KTS1890A version only
- FLT Fault Open-Drain Logic Output
- Hiccup Mode Auto-Retry after Faults
- -40°C to 85°C Operating Temperature Range
- 20-bump WLCSP 2.49 x 1.99mm (0.5mm pitch)
Availability and Pricing
Information availability and pricing please visit email: sales.europe@macnica.com.
About Kinetic Technologies
Kinetic Technologies designs, develops and markets proprietary high-performance analog and mixed-signal power and protection semiconductors across consumer, communications, industrial, automotive and enterprise markets, to deliver protected solutions tolerant of real-world fault conditions.
The company’s product sit “Behind Every Port™”, deliver solutions to not only provide, protect, regulate, and monitor power consumed by analog and digital semiconductors and other electronic loads, but to also switch, transform and protect high resolution video, audio, and data signals.
Kinetic Technologies develops application-specific products that solve audio-video interface, protection, and power management needs across smartphones, tablets, and wearables, as well as serving a wide range of industrial, automotive and enterprise solutions. Kinetic Technologies, a Cayman Corporation, has R&D centers in Silicon Valley and Asia, with operations and logistics based in Asia.
For more information, please visit https://www.kinet-ic.com/.
*The Kinetic Technologies logo is a trademark of Kinetic Technologies. All other brand and product names appearing in this document are the property of their respective holders.
Founded in 1990 as ATD Electronique, Macnica ATD Europe headquarter offers in-novative components dedicated to imaging applications for the European market. Its product portfolio includes: image sensors (CCD, CMOS, InGaAs, Thermal etc.), op-tics, interface circuits, FPGA & IPs, imaging processors, cables and OLED micro-displays.
It also covers development tools and design services enabling fast and efficient reali-zation of new high-performance camera systems for markets such as machine vision, medical, life sciences, surveillance, automotive and others. After the acquisition of the company by Macnica Inc. as of October 1, 2020 the company operates under the name Macnica ATD Europe.
About Macnica ATD Europe GmbH, (former Macnica GmbH)
Macnica’s ATD Europe GmbH, (former Macnica GmbH), was originally established in the UK in 2006, and moved to Germany in July 2008, to increase efficacy of its service for European customers.
By it’s acquisition of the Munich based company Scantec Mikroelektronik in 2014 Macnica Europe formed a powerful semiconductor distribution with headquarter in Ingolstadt and offices in Munich, Regensburg, Milton Keynes (UK) and Warsaw of-fering an attractive and competitive portfolio of highly sophisticated devices.
Macnica provides end to end support from design-in to production through its global service network to its customers, regardless of the final destination of the product shipment to customers’ manufacturing locations.
About Macnica, Inc.
Macnica was established in 1972 as a semiconductor distribution company headquar-tered in Yokohama, Japan, and has over 85 sales offices worldwide in eastern Asia, Europe and the USA. Total number of employees is over 3,900 and its consolidated revenue for fiscal 2021 was approximately US$ 7.6 B.
Macnica is famous for having an excellent engineering team of more than 900 appli-cation support engineers, IC designers and software developers with strong focus on providing technical support for its customers including custom design services. Mac-nica is continuing to extend its presence globally by having successful partners in strategic areas in the electronics market.
Macnica ATD Europe GmbH
Nürnberger Str. 34
85055 Ingolstadt
Telefon: +49 (841) 88198-0
Telefax: +49 (841) 88198199
http://www.macnica.eu/de
